Ireland & Northern Ireland
Automatic Door Maintenance and Repairs
NS Motion repairs, services and maintains automatic doors for commercial buildings across Ireland and Northern Ireland. Our own engineers diagnose sensor, motor, belt, control and track faults on site, on doors we installed and on doors supplied by other manufacturers. If a door is stuck open or closed, call us.
Emergency call-outs
Door Stuck Open or Closed?
A door that fails open leaves the building unsecured. A door that fails closed blocks the entrance. Call us with the door type, the make if you know it and what the door is doing, and we will arrange an emergency call-out for automatic or manual doors across Ireland and Northern Ireland.
Automatic door repairs
Automatic Door Faults We Fix
Most automatic door failures give warning first: noise, hesitation, or a door that opens for nobody. Our engineers diagnose sensor, motor, belt, control and track faults on site, whoever made the door.
Sensors and Detection
A door that opens when nobody is there, or stays shut when someone is. We test the activation and presence sensors and re-set the detection zones.
Motors, Belts and Drives
Slow, juddering or noisy travel usually points to the drive. We check the operator, motor, belt and gearbox and replace worn parts.
Tracks, Rollers and Carriages
A leaf that drags, scrapes or bounces back off the closed position. We check the tracks, rollers, carriages and guides for wear and alignment.
Locks, Controls and Egress
A door that stays locked, will not lock, or ignores the access system. We test the locking unit, the controls and the emergency break-out function.
Choose the right service
A One-Off Repair or a Service Contract?
If a door has failed or is showing warning signs, it needs a repair visit. If you want every entrance checked on a schedule, a maintenance contract is the better fit.
Repair or One-Off Service
For a door that has stopped, is showing warning signs or has gone a long time without a service. We find the fault, fix it and record what was done, on one door or several.
Maintenance Contract
For facilities teams who want every powered entrance on a servicing schedule, with EN 16005 aligned safety checks and a written record for each door, on one site or across a portfolio.
What to expect
How a Service Visit Works
Every visit follows the same order, whether it is a breakdown or a routine service.
Tell us about the door
The door type, the make if you know it, where it is and what it is doing. Photos or a short video help the engineer arrive prepared.
Diagnosis on site
Our engineer checks the sensors, drive, tracks, controls and safety functions to find what is causing the fault.
Repair and adjustment
Worn parts are replaced and the door is set up again. In-house fabrication lets us replace and upgrade door components quickly.
A written record
You get a service record for the door, with any recommended remedial works noted, ready for tenders, audits and insurers.
Want to know what a compliant service should cover? Read our EN 16005 automatic door maintenance checklist.
Doors we look after
Doors We Maintain and Repair
We service and repair the entrance systems we design and install, and the same types of door supplied by other manufacturers.
Why NS Motion
Why Facilities Teams Call NS Motion
SafeContractor Approved
Alcumus SafeContractor accredited, with the paperwork that managed and public sites ask for.
Our Own Engineers
Every visit is carried out by our own engineers, not subcontracted labour.
We Build What We Service
Design, manufacture, installation and maintenance under one roof, backed by over 30 years in door automation.
Any Make of Door
We take on doors supplied by other manufacturers, including inherited entrances with no service history.
Where we work
Maintenance and Repairs Across Ireland and NI
We work from Kilcock, Co. Kildare and cover the Republic of Ireland and Northern Ireland, so groups with sites on both sides of the border can use one supplier.
Belfast & Northern Ireland
Automatic door repairs and servicing for commercial and retail entrances across Belfast and Northern Ireland.
Belfast & NI ServicesDublin & Ireland
Automatic door repairs and servicing across Dublin and nationwide, from a single entrance to a multi-site portfolio.
Dublin & Ireland ServicesFAQ
Maintenance and Repair FAQs
Who fixes commercial automatic doors near me?
NS Motion repairs and services commercial automatic doors across the Republic of Ireland and Northern Ireland, working from Kilcock, Co. Kildare. Our own engineers cover Dublin, Belfast and towns nationwide. Call +353 1 539 2679 with the door type and location and we will arrange a visit.
How do I get my automatic doors serviced?
Call us or send an enquiry with the number of doors, the type and the make if you know it. We will arrange a service visit, check each door and give you a written record. If you want every entrance on a schedule, ask about a planned maintenance contract.
Do you offer an emergency automatic door repair service?
Yes. We run emergency call-outs for automatic and manual doors that are stuck open or closed, across Ireland and Northern Ireland. Our engineers attend equipped to diagnose sensor, motor, belt, control and track faults on site, so most issues are resolved without a second visit.
Do you maintain manual doors as well as automatic doors?
Yes. We inspect, adjust and repair manual doors and door closers alongside powered entrances, so the whole entrance can be covered on one visit. That includes aluminium doors, screens and curtain wall entrances.
Get in touch
Talk to Our Maintenance Team
Tell us how many doors you have, what type they are and what they are doing. We will tell you whether it needs a repair visit, a service or a contract.
Prefer email? sales@nsmotion.ie
