Standard
The universal choice for a shop entrance.
- One leaf or two
- Up to 3000 mm clear opening on two leaves
- Slim 10 cm drive
A shop door opens all day, shows off the shop and has to stay safe for every customer. This guide covers how to choose one: the type of door, how wide the entrance can be, safety and escape routes, the glass and frame, the controls and the servicing. For the whole range, see our automatic doors for Irish commercial buildings.
A standard door is the usual starting point, and the other types each solve one problem. The Doorson 300 line we install comes as standard, telescopic, frameless, prismatic, break-out and curved doors, all with the same slim 10 cm drive. The entrance, the wall beside it and the look you want decide which one.
For the systems themselves, see our Doorson 300 standard and telescopic sliding doors.
The universal choice for a shop entrance.
For a wide opening where the wall beside the door is short.
For a glass frontage that is part of the brand.
A standard door opens up to 3000 mm clear on two leaves, and a telescopic door reaches the same width from less wall. The manufacturer publishes a clear opening range for each type in the Doorson 300 line:
| Door type | Clear opening width | Largest clear height | Suits |
|---|---|---|---|
| Standard (300) | One leaf 800 to 2000 mm Two leaves 800 to 3000 mm | 3000 mm | Most shop entrances |
| Telescopic (300 T) | One-sided 900 to 3000 mm Two-sided 1600 to 3000 mm | 3000 mm | Wide openings with little wall beside the door |
| Frameless (300 thales) | One leaf 800 to 2000 mm Two leaves 800 to 3000 mm | 3000 mm | Glass frontages where the frame should almost disappear |
| Prismatic (300 P) | Two leaves 800 to 3000 mm | 3000 mm | Corner entrances |
| Break-out (300 A) | One leaf 800 to 1200 mm Two leaves 800 to 2200 mm | 3000 mm | Doors on an escape route, subject to the building's fire strategy |
| Curved (300 C) | Set by the radius of the curve | 2500 mm | Rounded shopfronts |
Clear opening width is the gap people walk through when the leaves are open. Figures from the 300 product line brochure (PDF). Your survey confirms what fits your opening, because the leaves need room to travel beside it.
A sensor built into the door, a standard written for this kind of door and a glass line people can see do most of the work. A shop door is used by everyone, from a wheelchair user to a parent with a buggy to a delivery driver, so safety is part of the choice, not an extra.
The 300 line has a sensor built in for pedestrian safety, so the door can tell when someone is in its path.
EN 16005 is the European standard for safety in use of power operated pedestrian doorsets. We service to it, and the 300 line can be supplied to meet it on escape routes.
A marked band across the glass helps people see a glass door, as on the doors pictured further down this page.
A hands-free opening helps customers with mobility needs, prams and deliveries alike. Our guide to how automatic doors improve accessibility and security covers the wider picture, and how to specify automatic doors in Ireland covers the process from brief to handover.
Plan the escape route before you choose the door. If a shop door is also a way out, the type of door and the way it behaves when things go wrong matter as much as how it looks.
The door opens on a sensor, switch or access control and closes again once the opening is clear.
The 300 line is available with a redundant function, which allows it to be installed on emergency exits and escape routes, according to EN 16005 and EN 16361.
The break-out version of the line is made for doors on an escape route, in one-leaf and two-leaf sizes.
If the door sits on a fire compartment line, a fire-rated sliding door may be needed. See our fire and sliding door systems.
How the door behaves when the power fails depends on the model and the locking, so ask for it to be confirmed in writing before you order.
Escape doors are life-safety equipment. The door, the hardware and the building's fire strategy have to agree before anything is fitted.
The door can be set up around the shop's look, rather than the other way round. The manufacturer's brochure lists the choices that change how a sliding door looks from the street.
Natural anodised aluminium, or a RAL colour for the drive and profile.
Frameless, float, thermo or panel leaves, depending on the look and the building.
Different glass colour options, so the glazing suits the frontage.
Anodised aluminium panels where a solid section suits the design better than glass.
The drive is only 10 cm high, so it takes little of the head height above the door.
Smooth, quiet movement, which suits a shop floor and a reception area alike.
Decide how the door is triggered, then how it is locked, then how it is watched. The Doorson 300 can be operated by sensors, switches, a smartphone app or access control, and it is built to be monitored.
Choose what triggers the door.
Choose how the door is secured after hours.
Choose how faults are found.
A shop door that stops working keeps customers out or stops you locking up, so plan the servicing when you plan the door. The same team that designs and installs the door can repair and service it.
For a door that is stuck, slow or has stopped working.
Scheduled visits across one shop or a group of them.
Simple checks that staff can do themselves.
High-traffic doors should be serviced every three months and most commercial automatic doors every six, in line with EN 16005. Shop entrances are usually high-traffic, so agree the interval when the door is installed. In Northern Ireland, our Belfast and NI team supplies, installs, services and repairs automatic doors too.
A few measurements and photos let us say which door suits before anyone visits. Send what you have and we will ask for the rest.
Width and height in millimetres, and whether it is a new opening or an existing one.
How much wall or glazing sits either side. It decides whether a standard or a telescopic door fits.
The shopfront from outside, the entrance from inside and the fascia or ceiling above the door.
Opening hours, deliveries, and whether staff-only doors need a card, fob or keypad.
Whether this door is a way out of the building, or sits on a fire line.
Frame colour, glass and any panels, or a photo of a look you like.
Email photos and measurements to sales@nsmotion.ie or call +353 86 382 7196.
For most shopfronts a standard sliding door is the starting point: one or two leaves, a slim 10 cm drive and a clear opening of up to 3000 mm on two leaves. A telescopic door suits a wide opening with little wall beside it, and a frameless or curved door suits a premium glazed front. A survey confirms which fits your opening.
Manufacturer ranges for our Doorson 300 line: a standard door has a clear opening of 800 to 2000 mm on one leaf and 800 to 3000 mm on two leaves, up to 3000 mm high. A telescopic door opens 900 to 3000 mm one-sided or 1600 to 3000 mm two-sided. Your survey confirms what fits your opening.
Yes, with the right version. The Doorson 300 line is available with a redundant function that allows it to be installed on emergency exits and escape routes, according to EN 16005 and EN 16361, and there is a break-out version. The door, the hardware and the building's fire strategy must be agreed before anything is fitted.
In sleep mode the Doorson 300 line uses less than 0.5 W, according to the manufacturer, and the drive is only 10 cm high. Your running cost also depends on how often the door opens and how the building is heated.
It depends on the opening width, the number of leaves, the type of door, the glass and finish, any locking or access control, and the condition of the opening. We price from a survey, or from photos and measurements, so the quote matches your entrance.
High-traffic doors should be serviced every three months and most commercial automatic doors every six, in line with EN 16005. Shop entrances are usually high-traffic, so ask for the interval to be agreed when the door is installed. We offer repairs, call-outs and planned maintenance contracts.
Yes. NS Motion is based in Kilcock, Co. Kildare, and supplies, installs, services and repairs automatic doors across Dublin, the rest of the Republic of Ireland, and Belfast and Northern Ireland. Call +353 86 382 7196 or use our contact page to book a survey.
Send us photos and measurements, or book a survey. Our team works from Kilcock, Co. Kildare, and fits and services automatic doors for shops and commercial buildings across the Republic of Ireland and Northern Ireland.